Smaart India

SMAART Fundamentals + Practicum Session(Mumbai) – 11th and 12th Feb!

‘Smaart Fundamentals + Practicum Session’ is a 2 day training session, hosted by Lloyd Lee, Mumbai with me Dr. Rajesh Khade, A Rational Acoustics Certified Trainer as the Instructor.

Smaart India

This 2 day Smaart training will be an intensive training on various aspects of Smaart v8 followed by a complete hands on session to get you all set to start taking measurements and making informed on-field decisions.

The following topics will be covered in this 2 day Session :

Day 1 Agenda :
1)Audio Fundamentals (Wavelength, Frequency, Period, Comb Filtering).
2)FFT : Fast Fourier Transform.
3)Single Channel vs Dual Channel Measurements.
4)I/O Configurations.
5)RTA, Spectrograph and their applications.
6)Introduction to Transfer Function.
7)Magnitude, Phase, Impulse Response, Delay Tracking.
8)SPL Calibration and Measurment.
9)Microphone Correction Curves.

Day 2 Agenda
1)Making Sense of Phase.
2)Transfer Function Applications.
3)System Tuning.
4)Mains to Sub alignment.
5)Setting up Delay.
6)Practical hands on System Tuning and Alignment.
7)Q & A.

Training Date : 11th and 12th February 2020.

Training Timings : 10:00 am to 06:00 pm.

Training fees : Rs.18000/- + 18% GST = Rs.21,240/-

Repeat Offender Discount : If you have already attended any of my previous sessions and wish to attend again, it would be a pleasure to offer you a Rs.6000/- off on the training fees.

Training Venue : Lloyd Lee Company, Unit no : 3/123, 1st Floor, 36A Mahal Industrial Estate, Mahakali Caves Road, Opposite Apollo Industrial Estate, Gundavali Village, Andheri : East. Mumbai : 400093.

Smaart License Discount :  Every Attendee is entitled to get a 30% discount on purchase of New License of Smaart v8 New License.

Prerequisites : The training is open to all interested persons. Prior measurement / system alignment experience is not required, but is helpful.

For Practial Session : It will be beneficial, if you carry your own Soundcard, Measurement Mic and necessary connection cables for Day 2, to get you a step ahead in measurements.

The Registration for this Training Session is closed, as we have been booked to full capacity. We will soon announce the Next Training Session Dates.

By registering for the training, you agree to its Terms and Conditions.